I-WUXI Flyt New Energy Technology Co, Ltd.

Ikhasi_Banjaneri

S2 200W 300w 12V 248v 48v ovundlileli wind turbine generator

S2 200W 300w 12V 248v 48V ovundlile over terbind generator
  • S2 200W 300w 12V 248v 48v ovundlileli wind turbine generator
  • S2 200W 300w 12V 248v 48v ovundlileli wind turbine generator
  • S2 200W 300w 12V 248v 48v ovundlileli wind turbine generator
  • S2 200W 300w 12V 248v 48v ovundlileli wind turbine generator
  • S2 200W 300w 12V 248v 48v ovundlileli wind turbine generator

Incazelo emfushane:

1.Low Qala isivinini, ama-blade ayi-6, ukusetshenziswa kwamandla aphezulu komoya
Ukufakwa Kasi-2, ishubhu noma uxhumano lwe-flange ngokuzithandela
I-3.Blades isebenzisa ubuciko obusha bokuqonda ngokunemba kokuhlolisisa, ifaniswe nokwakheka okuhle kwe-aerodynamic kanye nokwakheka, okuthuthukisa ukusetshenziswa kwamandla komoya kanye nokukhipha unyaka nonyaka.
4.BUYAKWAZI UKUZEZA I-Aluminium Alloy, Ngama-2 Bearings Swivel, Kwenze Kusinde Umoya Oqinile Futhi Ukuqedelwa Ngokuphepha Kakhulu
I-5.Pentent Outlont Magnent AC generator ene-stator ekhethekile, yehlisa i-torque ngempumelelo, uqondanise kahle isondo lomoya kanye ne-generator, futhi uqinisekise ukusebenza kohlelo lonke.
I-6.Controllterler, inverter ingafaniswa ne-tocroding kwizidingo ezithile zamakhasimende.


  • :

    • Imininingwane Yomkhiqizo

    Amathegi Omkhiqizo

    Ividiyo

    Izici

    1.Low Qala isivinini, ama-blade ayi-6, ukusetshenziswa kwamandla aphezulu komoya
    Ukufakwa Kasi-2, ishubhu noma uxhumano lwe-flange ngokuzithandela
    I-3.Blades isebenzisa ubuciko obusha bokuqonda ngokunemba kokuhlolisisa, ifaniswe nokwakheka okuhle kwe-aerodynamic kanye nokwakheka, okuthuthukisa ukusetshenziswa kwamandla komoya kanye nokukhipha unyaka nonyaka.
    4.BUYAKWAZI UKUZEZA I-Aluminium Alloy, Ngama-2 Bearings Swivel, Kwenze Kusinde Umoya Oqinile Futhi Ukuqedelwa Ngokuphepha Kakhulu
    I-5.Pentent Outlont Magnent AC generator ene-stator ekhethekile, yehlisa i-torque ngempumelelo, uqondanise kahle isondo lomoya kanye ne-generator, futhi uqinisekise ukusebenza kohlelo lonke.
    I-6.Controllterler, inverter ingafaniswa ne-tocroding kwizidingo ezithile zamakhasimende

    Uhlu lwephakheji:
    1.Wind Turbine 1 Setha (Hub, Tail, 3/5 amabala, i-generator, hood, ama-bolts namantongomane).
    I-2.Ind Controller 1 ucezu.
    3. Ithuluzi lokufaka 1 Setha.
    4.Flange 1 ucezu.

    Ukucacisa

    Isifanekiso S2-200 S2-300
    Amandla alinganiselwe (W) 200W 300w
    Amandla kaMax (W) 220w I-320W
    I-voltage kagesi (v) 12 / 24V 12 / 24V
    Ubude be-blades (mm) 530/580 530/580
    Isisindo esiphezulu (kg) 6 6.2
    I-Wind Wheel Ububanzi (m) 1.1 1.1
    Inombolo ye-Blades 3/5 3/5
    Isivinini somoya sokuqalisa I-1.3m / s
    Isivinini somoya sokusinda 40m / s
    umshini wokwenza ugesi noma okunye 3 Isigaba 3 General Magnet generronous generator
    Impilo Yenkonzo Ngaphezu kweminyaka engama-20
    -Buzile I-HRB noma i-oda lakho
    Indwangu yama-blade injobe
    Impahla ye-Shell injobe
    Impahla yaphakade uzibuthe I-Rare Endmzane NDFEB
    Uhlelo lokulawula I-electromagnet
    Ukufihlela I-lubrication grease
    Ukushisa kokushisa -40 kuya ku-80

    Izidingo Zomhlangano

    1. Ngaphambi komhlangano we-generator yomoya noma kwinqubo yokulungiswa, sicela uqiniseke ukuthi ufunde ibhuku labasebenzisi kuqala ..

    2. Sicela ungafaki ama-turbines womoya ngezinsuku zemvula noma lapho isikali somoya sisezingeni 3 noma ngaphezulu.

    I-3. Ngemuva kokuvula iphakethe, kuyalulekwa ukuthi kube nomjikelezo omfushane kulezi zinto ezintathu zokuhola ze-turbines yomoya(Izingxenye zethusi eziveziwe kufanele zihlanganiswe ndawonye).

    4. Ngaphambi kokufakwa kwe-turbine yomoya, ukufutheka kwemibani kumele kulungiselelwe. Ungahlela izinsiza ngokuya ngamazinga kazwelonke, noma ungahle uhlele ngokwemvelo yendawo kanye nesimo senhlabathi.

    5. Lapho kuhlangana i-turbine yomoya, zonke izingxenye kufanele ziboshwe ngama-fasteners achazwe etafuleni1.

    5.Kowo ohlanganisa i-turbine yomoya, zonke izingxenye kufanele ziboshwe ngama-fasteners achazwe kuThebula2

    6. Ngaphambi kokuxhumeka phakathi kwe-turbine turbine flange kanye ne-tower flange, sicela uxhume okuholela emiholweni emithathu ye-turbine yomoya kuze kube yilapho kuholela khona umbhoshongo. Lapho usebenzisa indlela ye-hinge, wonke ama-abili izintambo akufanele abe ngaphansi kwama-30mm ubude futhi asongwe ngendwangu yendwangu ye-acetate ngezingqimba ezintathu, bese egcotshwa nge-Spun Glass Paint Tube. Ngale ndlela, xhuma ngazimbili izintambo (ukunakwa: Ukuhlanganiswa kwezintambo ngeke kuthwale isisindo soMbhoshongo kuholela ngqo, ngakho-ke izintambo ze-100mm ezansi kokuhlanganiswa kufanele zisongwe ngepayipi elinamathela bese lifakwa kwipayipi lensimbi . Ngemuva kwalokho, i-turbine turbine Flange ne-tower Flange ingaxhunywa.

    70 bangahambi bagqugquzele ama-turbines omoya, ukuphela (okufanele kuxhumeke nge-controller) ye-tower lead kufanele kusike ungqimba olufakayo lwe-10mm noma ngaphezulu. Bese usula imikhondo emithathu eveziwe (umjikelezo we-Shot) ndawonye.

    8 Kuphela ngemuva kokufaka konke ukufakwa kanye nokuhlolwa sekuqediwe futhi ukuphepha kwabasebenzi be-erewred kuqinisekisiwe, kuvunyelwe ukudilizwa okufushane okulondoloziwe bese uxhuma isilawuli kanye nebhethri ngaphambi kokugijima.

  • Okwedlule:
  • Olandelayo:

    • Imikhiqizo ehlobene